Gmsp index

Gipsy Major 1 & 10 Spare Parts List

ILLUSTRATED PARTS CATALOGUE

GIPSY MAJOR 1 and 10 ENGINES

Amendment No. 25, February 1990 GENERAL INDEX

	Page	Illustration faces page
Accessory drives, generator and vacuum pump	7	12
Accessory drives, revolution indicator drive	8	12
Accessory drives, magneto drive	10	12
Airscoop and baffle	13	13
Camshaft and tappets	17	17
Carburettor	19	—
Carburettor air-intake and flame trap housing	25	26
Carburettor flooder	23	—
Cockpit data plate	108	—
Connecting rods and pistons	29	29
Controls	31	34
Crankcase	35	35
Crankshaft	41	42
Cylinder and cylinder head	43	43
Fuel pumps	49	49
Ignition, plain	55	—
Ignition, screened	59	—
Impulse starter	65	66
Induction pipe	67	67
Magnetos	71	72 & 73
Oil pressure filter	79	79
Oil pressure gauge connections	81	—
Oil pump and housing	83	84
Oil suction and scavenge filters	87	87
Oversize, undersize and special repair parts	131	—
Pipes, fuel and oil	89	89
Pipes, oil	91	—
Propeller boss (Major 1 and Major 10 Mk. 1)	93	—
Settling tank	99	100
Timing gear cover	101	101
Transport spares	105	—
Optional equipment, not fitted to basic engine	107	—
Accessory drive shaft for vacuum pump	111	—
Accessory drive shaft for vacuum pump and generator	110	—
Air-intake extension	109	—
Bearer arms	109	—
Carburettor flooder, finger ring.	107	—
Crankshaft, tapered (Major 1 and Major 10 Mk. 1)	119	—
Crankshaft, tapered (conversion) (Mod. 2495)	120	—
Exhaust manifold.	109	—
Generator, and additional parts required	112	—
Generator and vacuum pump, additional parts required	113	—
Hand turning gear	115	—
Primer pipes	107	—
Propeller boss (metal propellers).	119	119
Propeller boss (wooden propellers).	121	—
Revolution indicator drives	116	—
Starter	108	—
Starter adapter	108	—
Thermocouple, cylinder head.	108	—
Vacuum pump, and additional parts required	117	—
Variation to standard, for alternative installation in Auster J5/L (Mod. 2290) Major 10 Mk. 2-1.	125	—
Numerical index of part numbers	199	—
Modification Record Sheets

GENERAL INSTRUCTIONS

This spare parts list covers the Gipsy Major Series 1, and the Gipsy Major 10 Mark 1 and Mark 2. Throuhgout the list the part numbers and quantities required (No. o’ff) are arranged in three columns headed to indicate the engine to which they may be fitted. The 'description' column is divided into sub-columns (numbered 1, 2, 3, 4, 5 and 6) and the parts listed in any one subcolumn are those components of the preceding assembly or sub-assembly which can be supplied separately from that complete assembly. Parts marked * are not normally supplied separately as spares.

SYSTEM OF AMENDMENTS

A REGISTRATION AND CHANGE OF ADDRESS CARD is provided at the back of this Spare Parts List. Recipients are requested to complete and post the REGISTRATION CARD immediately they receive the List if they wish to be included in the circulation of subsequent amendments. Unless a registration card is received no amendments can be forwarded. So that distribution records can be kept up to date please use the CHANGE OF ADDRESS CARD when applicable or in the event of a transfer in the ownership of this List.

Every effort has been made to provide an amendment system which, while being as nearly foolproof as possible, shall cause the holder of the List as little clerical work as practical and enable anyone to see at a glance the amendment state of this List.

All amendments will be accompanied by a new TITLE PAGE. This will carry a statement:—

       Month 195-. This copy includes amendments Nos. and

On the BACK of the new title page will be the “ instructions ” and a note of the preceding amendments. Unless an amendment is small (i.e., changing a few figures or words) a new leaf/s (page or pages) will be issued. Each new leaf will carry a note at its bottom right-hand corner:—

Revised (or issued) by amendment No. -, month 195-.

Where a new leaf is not issued the “ instructions ” will conclude with a reminder that the holder of the List should make a note:—

“ Revised by amendment No. month 195-.”

at the foot of each page altered.

IMPORTANT.—Before commencing to insert amendments into this Sparc Parts List, make a check to ensure that the preceding amendment has been incorporated. It is essential that all amendments are incorporated in strict numerical sequence. Failure to do this can cause considerable confusion and renders the statement on the title page “ This copy includes amendment No............” untrue, since each amendment is compiled on the assumption that it is to be incorporated into a Spare Parts List containing all the preceding amendments.